With the development of science and technology and industry, car audio has continuously updated and added many new functions, especially high-end machine functions, but the operation is more complicated, which brings many difficulties and troubles to installation and use. Sometimes a false fault or abnormal condition is generated due to incorrect operation or a switch or button. The so-called false fault is that the sound itself has no problem, but the fault is caused by improper use.
Don't panic when something goes wrong, don't blindly conclude. You should calm down, read the product manual carefully, find the reason against the operating procedure, or call the relevant repair station or expert, perhaps helpful. This allows you to run less and reduce unnecessary maintenance or inspection fees. Below we introduce a few typical examples based on some of the conditions encountered during maintenance.
First, the use of the reset button 1, some hosts such as Kenwood KRC970 series products, immediately after power off, the radio system will change, to restore the original radio system, you can press the reset button to restore, if you can not recover, you must The power cord is disconnected, wait for 3 minutes and then connect, you can restore the original radio system 2, SONYXR-C5200, XR6200 and other models, sometimes there is no reaction after installation, that is to say, it can not work, some people think it is The host is broken, but it is not. If the host line is not connected incorrectly, just remove the panel and press the reset button on the lower left for more than 2 seconds to install the panel and start working.
3. When the Kenwood KRC487 tape is played, the button cannot be operated normally. This is a microprocessor failure. The method of elimination can be solved by pressing the reset button on the front panel.
4, Kenwood changer display normal playback but no sound, this is the microprocessor is not working properly. Remedy Press the reset button on the unit to solve the problem.
5. Advanced host with track programming, sometimes due to incorrect operation or crash, use the reset button to clear the error memory.
6, Aihua or Sony's old model opportunity CD can not play, this time to find the reset button on the host, hold down for 2 seconds to hear the machine has a reset action, then it should be able to work properly, if you still can not work, please focus on technology Personnel maintenance.
Second, the volume balance is small in the area of ​​the car audio panel, so the button can not be designed too much, so in the case of a lot of functions, a button to be responsible for a variety of functions, improper adjustment of the volume balance or operation When there is an error, there will often be problems with left and right or left and right sides that are not ringing, or even only one speaker. Many owners often think that there is a problem with the sound itself or the line. If you encounter this problem, it is recommended to adjust the volume balance button to adjust the volume balance before using the instruction manual.
The material of this product is PC+ABS. All condition of our product is 100% brand new. OEM and ODM are avaliable of our products for your need. We also can produce the goods according to your specific requirement.
Our products built with input/output overvoltage protection, input/output overcurrent protection, over temperature protection, over power protection and short circuit protection. You can send more details of this product, so that we can offer best service to you!
Lcd Adapter,Mini Size Lcd Adapter,Security Lcd Adapter,Waterproof Lcd Adapter
Shenzhen Waweis Technology Co., Ltd. , https://www.waweispowerasdapter.com