According to reports, in this year's CES, a 4.2-meter-high, 3.5-ton mech robot is particularly eye-catching. According to reliable sources, this robot will soon appear in the real version of the desert in Nevada. Come to a "hard-hitting" X1 Mech Racing League.
The 4.2-meter-high Prosthesis mech robot, shown at the International Consumer Electronics Show (CES) in Las Vegas this year, will soon make its debut in the desert of Nevada.
According to the inventor, the Prosthesis robot has a top speed of up to 32 km/h. Despite its huge size, there is almost no sound when it is opened. The 3.5-ton "anti-armor robot" is controlled by a driver at the center of the mechanical exoskeleton, who uses his arm movements to manipulate the robot to move quickly. They are considering the creation of an "X1 Mech Racing League" to give the Mecha Robots a "hard-to-hard" game.
The 4.6-meter-high Mech Racing Robot, shown at the International Consumer Electronics Show (CES) in Las Vegas, will soon be the first show in the desert of Nevada.
At CES 2017, Furrion from Elkhart, Indiana, first demonstrated the Prosthesis robot. This impressive robot was invented by engineer Jonathan TIppett. He began researching from the smaller Alpha Leg bionic arm and eventually invented this huge robot.
The Prosthesis robot needs to be controlled by the driver and relies on the direct contact feedback of the electro-hydraulic device to generate motion. The robot was originally designed to compete with other robots in large "mechanical" competitions. However, it is still unclear when such a competition will be held.
Exhibitors presented the large Prosthesis robot at the CES show in Las Vegas in 2017, calling it a top speed of 32 kilometers per hour – despite its large size, there is almost no sound when moving
The human driver pushes his limbs into the robot's exoskeleton and drives the robot's legs through the arm movements. KrisTIn Howard, who was responsible for the show, said at the CES show in 2017: “The driver sits inside and can move it with the body.†The robot can cope with rugged terrain and complex tasks, such as competing with other machines.
However, rather than being a robot, it is better to say that it is a complete set of equipment. It is very quiet, you can hardly hear the sound when you walk. Prosthesis can span obstacles and can run for up to an hour when fully charged.
According to the inventor, the Prosthesis robot has a top speed of up to 32 km/h. Despite its huge size, there is almost no sound when it is opened.
Figure | The robot is 4.2 meters high, 5 meters wide and weighs 3.5 tons
In fact, this is a large sports robot. Although it has not been sold yet, it may eventually be used in the racing league. Prosthesis's official website is to hold a large human-powered robot in a stadium as a player's obstacle course, challenge and hard-fitting competition, rather than a traditional car or truck race.
The inventor believes that the ultimate alliance of drivers and robots will push the limits of technology and human performance.
The robot is controlled by a driver at the center of the mechanical exoskeleton and uses the motion of the arm to move the robot to move quickly.
Constant Voltage Led Driver
Fahold, a 8 year old company brings light power to your life by illuminating your offices, factories, warehouses, shopping malls, airports, etc. with its high quality LED Linear lighting products and solutions. LED Linear lighting springs out few years ago, we see the power of the linear lighting solutions, so over the years, we have been innovating our 230vac to 24vdc power supply, 24v Ultra Slim Led Driver, 12v led power supply 5a driver for these type products to give you healthy low carbon environment with low energy consumption.
Application: LED Light boxes, led linear lights, led troffer ect.
Parameter:
Input Voltage:100-277V
Output voltage: 12V / 24V/36V/48V
Current: 1.6A /2.2A /2.5A /2.7A /3.3A /4.1A /5A /8A
Power factor: >0.95
THD: <15%
Dimming: 0-10V/PWM/RX/Dali
What's the benefits of Fahold Driver?
- Standard Linear Lighting
- Cost-effective led driver solution for industry,commercial and other applications
- Good quality of led driver with high efficiency output to meet different requirements
- Easy to order and install,requiring less time,reducing packaging waste and complexity
- Flexible solution
FAQ:
Question 1:Are you a factory or a trading company?
Answer: We are a factory.
Question 2: Payment term?
Answer: 30% TT deposit + 70% TT before shipment,50% TT deposit + 50% LC balance, Flexible payment
can be negotiated.
Question 3: What's the main business of Fahold?
Answer: Fahold focused on LED controllers and dimmers from 2010. We have 28 engineers who dedicated themselves to researching and developing LED controlling and dimming system.
Question 4: What Fahold will do if we have problems after receiving your products?
Answer: Our products have been strictly inspected before shipping. Once you receive the products you are not satisfied, please feel free to contact us in time, we will do our best to solve any of your problems with our good after-sale service.
24Vdc Power Supply,24V Ultra Slim Led Driver,12V Led Power Supply
ShenZhen Fahold Electronic Limited , https://www.fahold.net