RALEIGH, NC - December 18, 2013 - Telit Wireless SoluTIons, a provider of high quality global Internet of Things (M2M) solutions, products and services, and SiTIme CorporaTIon in Sunnyvale, California, is based on MEMS technology Semiconductor companies developing revolutionary clock devices today announced the world's smallest and lowest power GPS receiver solution - Telit's JupiterSE880 and SiTIme's SiT15xx oscillator – a GPS receiver that consumes only 15μA during sleep At the same time, it can be restarted in less than one second. SiTime's SiT15xx series uses microelectromechanical technology (MEMS) to produce oscillators that overcome the limitations that traditional quartz components cannot break. Volume: SiTime's devices offer 85% savings in power consumption: 50% lower power consumption: 15 times more reliable than traditional quartz. SiTime's SiT15xx series and Telit's JupiterSE880 miniature GPS receiver. It creates tracking and navigation devices that are smaller, consume less power, and last longer.
Battery-powered electronic devices, such as trackers and personal navigation systems, use sleep technology to extend battery life (meaning turning off the functional module with the highest leakage current and switching it to the lowest power suspend/hibernate state). However, in a low-power state, a continuously oscillating 32 kHz clock source will continue to drain battery power. SiTime's 32 kHz SiT15xx family features current cores as low as 750 nA and unique power-saving features such as programmable output frequency and output amplitude, which significantly reduces system power consumption compared to traditional crystal clocks. In addition, conventional quartz components can cause frequency drift with temperature changes, so the system needs to wake up more frequently to correct the system clock. The SiT15xx is capable of ± 100 PPM over the industrial temperature range and is 2 to 3 times more stable than conventional quartz. This reduces the need for system wake-up and further reduces power consumption. The SiT15xx series operates from a regulated 1.2V to 3.63V supply or from a 2.7 to 4.5V Li-Ion battery. The SiT15xx oscillator is available in a minimum 1.5x0.8mm chip scale package (CSP) without the need for external capacitors.
The miniaturized 4.7x4.7mm LGA (Planar Grid Array Package) and the SiRFstarIVTM-based Telit JupiterSE880 Receiver Module not only incorporate leading heterogeneous å-dimensional integration technology, but also incorporate the latest TCXO and 32kHz oscillators. product. It has the best performance in similar miniaturized products.
Thanks to the state-of-the-art 3D RF design, the system noise and parasitic impedance are greatly reduced compared to traditional 2D RF designs. Using a composite filter technology, including a traditional SAW filter, a typical GPS receiver design is also a 2.4 GHz band-rejection filter that reduces interference effects in radios such as Wi-Fi hotspots, Bluetooth, and wireless telephone systems. This greatly affects the performance of GPS receivers in harsh wireless environments.
“SiTime's innovative silicon MEMS overcomes the limitations of traditional quartz and is designed with higher performance, lower power consumption and smaller size clock component solutions. For the fast-growing mobile market, our SiT15xx series is 32 kHz. The oscillator has these advantages:
Piyush Sevalia, executive vice president of marketing at SiTime, said. “We are pleased to work with Telit on their low-power GPS module. SiTime's 32 kHz oscillator provides 2 to 3 times better stability than a quartz oscillator – which makes sleep and standby modes more accurate The control greatly reduces the power consumption of the system. This is a SiTime MEMS that can provide our customers with unprecedented performance examples.
Mike Ueland, senior vice president and general manager of Telit Wireless Solutions North America, said "wearable technology is an emerging application area, especially in positioning technology." “With the miniaturization of the miniature GPS receiver area, there will be more and more new product applications on the market.â€
With more than a decade of experience focused on M2M, Telit is the industry's complete solution provider for OEMs and integrators to reduce technology risk and time to market. Take advantage of M2M's broadest portfolio, with m2mAIR services, including application enablement, as well as connected mobile networks and Internet/cloud mobile, short range and location technologies. Telit's products and services are delivered with global technical support and logistics to meet the stringent requirements of our customers.
SiTime company SiT15xx picture: http://
TelitJupiter SE880 picture: http://SE880-graphic
SiTime Company Profile
SiTime is a semiconductor company that replaces the $5 billion market for traditional quartz products with revolutionary new MEMS technology. With an 80% market share and more than 175 million shipments, SiTime is driving 100% of MEMS-based clock components in the electronics industry.
SiTime's programmable solutions enable customers to achieve higher performance, reduced size and increased reliability. Through our solutions, customers are more flexible in integrating their supply chains and reducing inventory and lead times. By using standard semiconductor processes and high-capacity plastic packaging, SiTime offers the industry with the best availability and the shortest lead times.
Many top manufacturers choose SiTime as a supplier of clock components. And see SiTime as "The Smart Timing ChoiceTM"
About Telit
The Telit Wireless Solution (AIM: TCMTilit Communications PLC is available) is the global enabler of the Internet of Things (M2M) positioning module and manages M2M and value-added services through its business unit m2mAIR including mobile network side and cloud. Telit, which specializes in M2M for more than 12 years, sells products and services in more than 80 countries, and continues to develop technology through seven R&D centers around the world.
By providing a scalable product line, rapid development tools for application development, and tailored M2M connectivity, Telit can reduce development costs, protect investments, design, and reduce technology risk. The company provides customer support and design assistance through 32 sales and support offices, experts with a global distribution network of over 30 competency centers, and Telit Technical Support Forum.
Telit provides services and facilities for all products, and organizations that connect to the Internet of Things (IOT) Internet enable them to wirelessly collect, process and respond to real-world data from connected devices, creating new benefits.
GALOCE junction and summing boxes accept inputs from multiple load cells and sum the generated signals into a single output to ensure an accurate multi-cell balance adjustment. high quality stainless steel housing.Our junction boxes can accommodate 2 to 12 parallel Load Cell connections. Universal applications in weighing machinery, Process Weighing, test & measurement and process automation and control sectors.
Electrical Junction Box,load cell Junction Box,Summing Box for load cells,Junction boxes and Wiring,connection box
GALOCE (XI'AN) M&C TECHNOLOGY CO., LTD. , https://www.galoce-meas.com