Kind
Product
Minute
Analysis
Newspaper
Report
Batch Number: 20121206
Material: Hyper 0DS2 C18
Flow Rate: 1.0 ml/min
Mobile Phase: Acetonitrile: Water = 40:60
Pressure: 10.0 MPa
Column Length: 250 mm
Detector: DAD at 210 nm
Column Diameter: 4.6 mm
Injection Volume: 20 µL
#
Component Name
Retention Time
(min)
Peak Height
(mV)
Peak Area
(mV·s)
Area Percentage
(%)
1
Anthrone
15.68333 1212.18 10942.41 99.7549
2 Unknown
21.15167 3.16 26.89 0.2451
This analytical report provides detailed information about the Anthrone sample, including its chemical properties, storage conditions, and HPLC analysis results. The sample was analyzed using a reverse-phase HPLC system with a Hyper 0DS2 C18 column, under specific chromatographic conditions. The retention time of Anthrone was recorded as 15.68 minutes, with a peak area of 10942.41 mV·s, representing 99.75% of the total area. An unknown compound was also detected at 21.15 minutes, contributing 0.25% to the total area. The purity of the sample is reported to be 99.7%, meeting the required standards for quality control. The sample should be stored at 4°C in a sealed container, away from direct light to maintain stability and integrity over time.
24V Pwm Solar Charge Controller,Solar Mppt Controller,Power Inverter With Charger
GuangZhou HanFong New Energy Technology Co. , Ltd. , https://www.gzinverter.com