Use RT809 programmer instead of upgrade small board to upgrade Skyworth 8R and 8A movements and other network TV upgrade tooling setting method - Home Appliances

Modern skhynix emmc 8G industrial grade H26M31001HPR

Programmable Package SG-8018CA(SG7050C) 0.67M~170M

RF cable can be customized for other specifications

Shunluo agent

After upgrading the small board and working with Skyworth sales, you might have noticed that there is a lot of movement data in the Skyworth upgrade information. It's not complicated to use, and some users even buy it themselves (especially those who face issues like network TV system card failure). This tool is also compatible with brands like Changhong, Hisense, TCL, Konka, Haier, LeTV, TPV, and more. Therefore, it's essential to understand and utilize this tool effectively. The RT809 programmer (F or H) is one of the most commonly used tools when starting up the software. It allows for offline reading and writing of memory chips as well as online operations on the motherboard. However, this software only works for certain models. For others, you may need to use official software from the "Toolchain Panel." One of these tools is the "SecureCRT serial printing tool," which is mainly used to view LCD TV printing information, perform U-disk upgrades, and adjust screen parameters. To get started, simply plug in the programmer and open the RT809F or RT809H software on your desktop. Then click on the "Toolchain Panel" in the upper right corner and locate the SecureCRT serial print tool. Follow the settings shown in the images below. With the right tools, materials, and procedures, you can successfully replace the tooling.

Skyworth 8A08 software upgrade instructions.rar
Skyworth 8A10 software upgrade instructions.rar
Skyworth 8R90 repair manual.rar
Skyworth E690U series [9R10] serial port change screen parameters.rar
8A02 serial port command and debugging method.pdf
TCLMs901K movement ordinary, mandatory, network port, serial port software upgrade.rar
Changhong LM38 movement using tooling to change the screen method.rar