Production of practical micro power amplifier tda1521

The power amplifier has few components, simple production and good sound quality, and is very suitable for being installed in an active speaker. The effect is ideal and the cost is low, suitable for beginners.
The power amplifier IC uses TDA1521. When the power supply voltage is ± 16V, the output power is 12W & TImes; This circuit is equipped with equal loudness compensation circuit to improve the high and low bass effect at low volume. W is a double-connected eight-pin potentiometer with center tap, which is connected with C1, R1 and C2 to form an equal loudness control circuit. The circuit diagram is shown below.
Production notes: 1. The heat sink of TDA1521 must not be grounded, otherwise the IC will be damaged after starting! Mica sheet insulation should be added between the IC and the radiator, and an appropriate amount of thermal grease should be added, and then the radiator should be grounded. 2. Potentiometer W resistance value is 100kΩ, and its shell needs to be grounded. 3. The power connection between the ⑤ and ⑦ pins from the filter capacitor to the IC should be as short and thick as possible, and a layer of tin can be stacked on the copper foil of the printed board.
After the production is completed, test the sound, turn the volume potentiometer to the maximum, and close to the speaker can hardly hear noise. Using a CD player to test, when connected to a floor speaker, compared with the pioneer M-850 power amplifier, the sound quality is satisfactory except for the slightly lower power.
Shen Yujun, Hunan

CSRME Safety Controller is developed for standard GB27607. By monitoring machine tool safety related equipment, the security of machine control system can meet the requirements of GB27607, and its security meets the requirements of ISO13849-1 (PLe) and IEC61508 (SIL3).

With rich interfaces, CSRME has limited programmable function. It can simultaneously replace many different types of safety control modules or safety PLCs, thus greatly simplifying the safety design of machine control systems and reducing cost.

Safety Controller

Safety Controller,Modular Safety Controller,Safety Controller,Electrical Safety Controller,Programmable Logic Controller,Banner Safety Controller

Jining KeLi Photoelectronic Industrial Co.,Ltd , https://www.sdkelien.com

Posted on